CT-222F Module kỹ thuật số ngõ ra 16 kênh, 24VDC source của Odot
◆ the module supports 16 channels digital output, the output high level is valid, the output voltage is 24VDC.
◆ module can drive field equipment. (relay, solenoid valve, etc.)
◆ the internal bus of the module and field output are using opto-coupler.
◆ the module has 16 digital output channel LED indicator light.
◆ the module has the functions of thermal shutdown and overcurrent protection.
◆ the module supports short circuit protection and overload protection.
Technical Parameters
|
General Parameters
|
|
Power
|
Max.83mA@5.0VDC
|
|
Isolation
|
I/O to internal bus: opto-couple isolation (3KVrms)
|
|
Field Power
|
Nominal:24VDC, Range: 19.2～28.8VDC
|
|
Wiring
|
Max.: AWG 18
Min.: AWG 24
|
|
Installation
|
35mm DIN-Rail
|
|
Size
|
115*14*75mm
|
|
Weight
|
65g
|
|
Environment Specification
|
|
Operating Temperature of Vertical Installation
|
-35℃~70℃
|
|
Operating Temperature of Horizontal Installation
|
-35℃~60℃
|
|
Relative Humidity
|
5~ 95%RH (No Condensation)
|
|
Storage Temperature
|
-40℃~85℃
|
|
Storage Humidity
|
5~ 95%RH (No Condensation)
|
|
Manufacturing Test Temperature
|
-40℃~75℃
|
|
Ingress Protection Rating
|
IP20
|
|
Vibration Resistance
|
Comply with IEC 61131-2 and EC 60068-2-6
|
|
Impact resistance
|
Comply with IEC 61131-2 and IEC 60068-2-27
|
|
EMC Performance
|
Comply with IEC 61131-2 and IEC 61000-4
|
|
Output Parameters
|
|
Channel Number
|
16 channel source type output
|
|
LED Indicator
|
16 channel output LED indicator
|
|
Rated Current
|
Typical value: 500mA
|
|
Leakage Current
|
Max：10uA
|
|
Output Impedance
|
<200mΩ
|
|
Output Delay
|
OFF to ON: Max.100us
ON to OFF: Max.150us
|
|
Protection
|
Overtemperature shutdown: typical value is 135℃
Overcurrent protection: typical value 1.1A
Short circuit protection support
|
|
Load type
|
GENERAL USE LOADS, PILOT DUTY LOADS
|
