WLD2 là máy dò rò rỉ nước WiFi / Ethernet có hỗ trợ WWW, SNMP, email và PoE. Báo động được kích hoạt ngay cả khi có lượng chất lỏng nhỏ nhất chạm vào cáp cảm biến WLD ở bất kỳ vị trí nào dọc theo toàn bộ chiều dài của cáp, chẳng hạn như ngưng tụ từ đường ống A/C hoặc rò rỉ nước nói chung. Bạn sẽ nhận được báo động trước khi xảy ra thiệt hại tốn kém. Ngoài cảnh báo về nước, thiết bị còn phát hiện cáp cảm biến bị ngắt kết nối hoặc bị hỏng để tăng độ tin cậy.
WLD2 hỗ trợ tạo vùng, 4 đầu vào vùng WLD cho cáp phát hiện WLD bên ngoài có thể được kết nối với WLD2 để giúp xác định vị trí rò rỉ chính xác hơn. Có thể gọi đến một số điện thoại khác nhau cho mỗi vùng.
Thanks to WiFi connectivity, the WLD2 water leak detector can be installed in remote places. In case of flooding, it can send an alert via e-mail, SNMP trap, or the SensDesk cloud. With an external SMS gateway by HW group, it can send a text message or dial a phone number. Of course, in critical applications, it can also communicate via wired Ethernet and can be powered with PoE.
WLD2 can be connected to the SensDesk portal, as well as to standard monitoring systems thanks to SNMP and SNMP Trap support. Water occurrence can be also signaled by switching a remote output (e.g. to start a siren) over the network (Box-2-Box mode with a Poseidon2 or Damocles2 unit), independently for each sensing cable. SensDesk Technology completes the HWg monitoring Ecosystem (sensors + devices + SensDesk Technology portal) and gets you long-term reliable alerts, graphs, PDF reports, open API, remote device management, etc.
The right Water Detection and early alert are essential in a lot of businesses, for example, data centers, etc. Water Leak Detection System from HW group is a complex solution developed to protect your facility against costly water damage that might threaten you.
Features:
- Intuitive WWW interface for fast and easy installation.
- Support for automatic network configuration via DHCP.
- Ability to communicate over WiFi (external antenna for extended range, support for 2.4GHz, 2.11 b/g/n) and Ethernet at the same time.
- Up to 4 detection zones (each max. 185m), the source of the leak can be identified more easily.
- WLD2 signals the following states: OK / Flooded / Sensing cable fault.
- Flooding alerts can be send as a standard e-mail, or as a text message (SMS) through a SMS gateway.
- Detected leaks or WLD sensing cable disconnections can be signaled by activating a relay output at a Poseidon2 or Damocles2 unit over the Ethernet.
- WLD2 can be easily mounted on a wall or in a 19" cabinet.
- Powered over PoE or from an external adapter.
Applications and usage:
• Water detection under raised floors.
• Leaky pipe detection (cable wrapped along the pipe).
• Protection against floods from skylights – sensing cable routed along the walls.
• Detection of water leaks in drip trays.
• Detection of water leaks under air-conditioning outlets.
