Bộ điều khiển đầu đốt Honeywell RA890F1304

+84 828 600 900 Email: info@tblcorp.vn L17-11, Tầng 17, Toà nhà Vincom Center, 72 lê Thánh Tôn, Phường Bến Nghé, Quận 1, TP HCM
Tiếng Việt Tiếng Anh

Bộ điều khiển đầu đốt Honeywell RA890F1304

The RA890F Protectorelay™ Primary Control is a nonprogramming, amplifying relay that provides solid state electronic flame safeguard protection for industrial and commercial gas, oil, or combination gas-oil burners
HONEYWELL
  • Thông tin sản phẩm
  • Tập tin
Bộ điều khiển đầu đốt Honeywell RA890F1304
  • Employs rectification principle of electronic flame detection using a flame rod, rectifying photocell, or C7012A,C Ultraviolet Flame Detector.
  • Clipping pilot link jumper wire permits use with standing pilots
  • Can directly replace RA890E and mount on same Q270A Subbase
  • Solid state circuitry eliminates vacuum tube replacement and increases resistance to vibration. Power application not required during Off cycle; no tube to warm up before starting.
  • Push-to-reset safety switch in dust-resistant enclosure
  • Built-in protection against ignition crossover in flame rod systems
  • Does not start if flame-simulating failure occurs in flame detector circuit
  • Automatic safety shutdown if flame fails on start, or if flame not re-established after flame failure
  • Flame signal current is directly measurable at test jack
  • Line or 24 volt, automatic or manual controller can be used. (Manual controller must open circuit on either power or flame failure.)
  • Captive mounting screws allow easy mounting and removal. Thermoplastic mounting base
  • Optional alarm circuit indicates safety shutdown.
  • RA890F1304
  • Liên hệ
  • 1139
Sản phẩm cùng loại
Zalo
Hotline